If the LCD displays 'Machine Error 46', the ink absorber pad is full and needs replacing. please refer to 'How do I clear Machine Error 46?'
- Brother Mfc J220 Installer
- Brother Mfc J220 Scanner Driver
- Brother Printer Mfc J220
- Brother Mfc J220 Manual
The message 'Unable to -' ( 'Unable to Change' 'Unable to Clean' 'Unable to Init' 'Unable to Print' 'Unable to Scan' ) is a general message and may appear for different reasons.
Powered Powered Unable To Init 48 Brother Printer Mfc-j220 If the problem still continues after clearing the paper jam, try to clean the Unable To Init 48 Brother Dcp-j315w a guide how to reset Epson L110.
- Download the latest drivers, utilities and firmware. FAQs & Troubleshooting. Find frequently asked questions and troubleshooting information. View or download manuals for your product. Consumables & Accessories. Learn about consumable supplies, accessories and options available for your product.
- When I unplug my printer and plug it back in I get to beeps and it shows 'Unable to Init.' The user's guide is totally useless as is Brother customer service.
To clear the message, you need to disconnect the Brother machine from the power outlet to check the machine.
Follow the steps listed below:
- Check for foreign objects, such as a paper clip or scrap of paper, inside the machine.
Disconnect the machine from the power outlet and open the scanner cover by pulling up on the lower right corner of the cover. Look inside the machine and remove any foreign objects. If you see jammed paper or another item inside this area, gently pull it out and then close the scanner cover securely. - If the error continues to appear, move the print head and examine under the print head.
NOTE: The images shown below are from the representative product and may differ from your Brother machine, but their inner structures are same.
2-1.Disconnect the Brother machine from the poweroutlet.
2-2.Open the scanner cover.
2-3.Check the print head's position.
In the example photo the print head is positioned at the left hand side of the platen area.
- If the print head is on the left side, go to step 2-4.
- If the print head is on the right side, go to step 2-7.
- If you can not find the print head, go to step 2-8.
2-4.Gently move the print head to the center.
2-5.Examine under the print head. If anything is found, remove it.
Use a flashlight if necessary to check thoroughly.
2-6.Close the cover and reconnect the machine to the power outlet.
If the message continues to appear on the LCD, the machine will require repair.
2-7. If the print head is on the right side.
The print head is positioned at the far right hand side, you cannot move it.
The machine has a mechanical malfunction and will require repair.
2-8. If you can not find the print head.
The machine has a mechanical malfunction and will require repair.
Brother Mfc J220 Installer
Brother MFC Printer Unable to Clean FIX!
Problem: Brother MFC Printer display 'unable to clean' or Error 46
Solution:
- First turn of the printer
- Switch on the machine while holding down the 'menu' button until all the leds are flashing on/off. Now you are in 'maintenance' mode.
- Press 80
- Press the 'mono start' button several times until you see 'purge: xxxx'
- Press '2783' in order to reset the purge counter. You will see: 'purge:0000'
- Press the 'stop' button.
- Press '99' to exit the maintenance mode.
Brother Mfc J220 Scanner Driver
Brother Printer Mfc J220
Follow the steps listed below:
- Check for foreign objects, such as a paper clip or scrap of paper, inside the machine.
Disconnect the machine from the power outlet and open the scanner cover by pulling up on the lower right corner of the cover. Look inside the machine and remove any foreign objects. If you see jammed paper or another item inside this area, gently pull it out and then close the scanner cover securely. - If the error continues to appear, move the print head and examine under the print head.
NOTE: The images shown below are from the representative product and may differ from your Brother machine, but their inner structures are same.
2-1.Disconnect the Brother machine from the poweroutlet.
2-2.Open the scanner cover.
2-3.Check the print head's position.
In the example photo the print head is positioned at the left hand side of the platen area.
- If the print head is on the left side, go to step 2-4.
- If the print head is on the right side, go to step 2-7.
- If you can not find the print head, go to step 2-8.
2-4.Gently move the print head to the center.
2-5.Examine under the print head. If anything is found, remove it.
Use a flashlight if necessary to check thoroughly.
2-6.Close the cover and reconnect the machine to the power outlet.
If the message continues to appear on the LCD, the machine will require repair.
2-7. If the print head is on the right side.
The print head is positioned at the far right hand side, you cannot move it.
The machine has a mechanical malfunction and will require repair.
2-8. If you can not find the print head.
The machine has a mechanical malfunction and will require repair.
Brother Mfc J220 Installer
Brother MFC Printer Unable to Clean FIX!
Problem: Brother MFC Printer display 'unable to clean' or Error 46
Solution:
- First turn of the printer
- Switch on the machine while holding down the 'menu' button until all the leds are flashing on/off. Now you are in 'maintenance' mode.
- Press 80
- Press the 'mono start' button several times until you see 'purge: xxxx'
- Press '2783' in order to reset the purge counter. You will see: 'purge:0000'
- Press the 'stop' button.
- Press '99' to exit the maintenance mode.
Brother Mfc J220 Scanner Driver
Brother Printer Mfc J220
Brother Mfc J220 Manual
and you are done!